Set of 3 mall leg to hold up 10 mm cor board
No matter what surface you want to place on sign on, these MALL LEGS will allow you to do it.
By putting the smaller section of the three piece set of MALL LEG into a 10 mm piece of fluted Cor Board, a very inexpensive sign can be made. Once the 4 inch portion of the MALL LEG are placed into the sign panel, the 10 inch portion of the leg is placed against the ground or mall floor. A heavy object is then placed on the legs, and an inexpensive sign is created. Three formed 3/8” diameter galvanized steel rods. Press
fit into 10mm cor-board to produce a very inexpensive
and attractive “Mall Sign”
|